Borg & Overstrom 818, Installation & Operation Manual

Page: 29 / 55

818 Sport Models
29
Problem/
Report Possible Cause Suggested Action
Miscellaneous
8 1 8 M O D E L S O N L Y
Trouble Shooting Fault Diagnosis Guide 5
Miscellaneous
Bleeping Noise Level Sensor fitted and
Tank full. Empty Level Sensor Tank.
No LED Lights No electricity to Machine. Check power supply and reconnect as
necessary (Also check out other symptoms
as described separately).
Check Fuse in IEC Socket. Replace if necessary.
Faulty PCB (Machine
working normally
otherwise). Replace PCB.
Machine shakes
on Start-Up Compressor Starting.
Level Surface. No action needed. This is quite normal.
Uneven Surface. Level up machine When installed with Base
Cabinet.
Missing Fixings. Replace missing fixings.
Tripping out
Electricity
supply Machine in high humidity
environment. Discuss possible repositioning with
customer.
Electrical circuitry faults. Test, identify and address accordingly.
See Electrical Diagrams.
(Contact Azure Technical Support for further
advice).