A
GB
1. FUNCTIONS
: cooking time - end of cooking - clock
- timer - manual operation
2. DISPLAY
Symbols indicating functions in progress:
duration and manual function = pot symbol
;
automatic programme =
"A"
Minute minder = bell symbol
3. SETTING A FUNCTION
Select the function required by pressing the correspon-
ding button and set the time with the +/- buttons.
4. LEGEND FOR BUTTONS
Bell button
Cooking time button
End of cooking button
- +
button = timer settings
Time is increased with the “+” button and decreased
with the “-” button at a speed directly proportional to the
length of time for which the button is pressed.
5. CLOCK FUNCTION
The clock function is activated by pressing the cooking
time
and end of cooking
buttons simulta-
neously. The time is set by pressing the +/- buttons.
Any previously set programmes will be automatically
cancelled.
6. MANUAL FUNCTION
This function is set by pressing the cooking time
and end of cooking
buttons simultaneously. The
symbol
"A"
disappears and the pot symbol appears.
Previously set programmes are cancelled.
7. SEMI-AUTOMATIC FUNCTION WITH COOKING
TIME
Select the cooking time function (
button) and set
the time with the +/- buttons. The symbols
"A"
and the
pot symbol
appear. The oven is switched on. When
the time coincides with the set time, shown on the end
of cooking button
, the oven is switched off and
the pot symbol disappears. The buzzer then sounds. The
symbol
"A"
starts to fl ash.
8. SEMI-AUTOMATIC FUNCTION WITH END OF
COOKING TIME
Choose the function end of cooking (
button) and
set the fi nal time with the +/- buttons. The symbols
"A"
and the pot symbol
appear. The oven is switched
on. When the time coincides with the set time the oven is
switched off and the pot symbol disappears. The buzzer
then sounds. The symbol “A” starts to fl ash.
9. AUTOMATIC FUNCTION WITH COOKING TIME AND
END OF COOKING
Choose the function cooking time
and set the
required time with the +/- buttons. The symbol
"A"
appears. The oven is switched on and the pot symbol
appears. Wait a few seconds until the current time
appears. Set the end time using the end of cooking
button
. the approximate fi nal time appears on the
display. Use the +/- buttons to set the fi nal time actually
required. The oven is switched off and the pot symbol
disappears. The pot symbol
will appear again
when the time coincides with the fi nal time minus the
cooking time. At the end of the automatic programme
the symbol
"A"
starts to fl ash. The buzzer sounds and
the oven and pot symbol disappear.
10. MINUTE MINDER
Choose the timer function (
button) and set the re-
quired time with the +/- buttons. The bell symbol
will
remain on for the duration of time set. At the end of this
time the buzzer sounds.
11. BUZZER
The buzzer sounds at the end of the cooking time fun-
ction and continues to buzz for 7 minutes. The buzzer
is silenced by pressing any of the buttons
or
. The volume of the buzzer can be adjusted using
the “-” button without having fi rst selected any function.
There are three different buzz volumes to choose from
and their duration depends upon the length of time for
which the “-” button is held pressed.
12. START OF A PROGRAMME AND CHECKING
Once a programme has been selected it starts after setting
the time. The time remaining can be viewed at any time
by selecting the corresponding function again.
13. IDENTIFYING A PROGRAMMING ERROR
There is a programming error if the time indicated on
the clock is between the cooking and end of cooking
times.
The error is indicated by the buzzer sounding and the
symbol
"A"
fl ashing.
14. CANCELLING A PROGRAMME
To cancel a programme select the manual function.
At the end of the set programme this is automatically
cancelled.
15. IMMEDIATE USE
A) If the display fl ashes read point B, otherwise go to
point C.
B) If the display fl ashes the correct time has not been set
or there has been a power failure. In this case, set the
correct time (see paragraph 5) and then go to point C.
C) Press the
and
button simultaneously. Set
the temperature (thermostat knob) and function (selector
knob) using the knobs on the appliance.
