![background image](http://html.mh-extra.com/html/boretti/btg-100/btg-100_operating-instructions-manual_2788376083.webp)
NL
FR
D
EN
83
Touch panel unlock
To unlock the touch panel, press the “key” button and the “+” button of the LH burner for at least
2 seconds. When the touch panel is unlocked the decimal points switch off in the power level
displays.
Programming burner off time
Each burner can be programmed to operate for a speci-
fi ed time, after which it switches off automatically.
To program the timer of a specifi c burner, press the
“timer” button. The position of each burner is shown
by means of a LED on the control panel. The LED will
illuminate to indicate that the burner has been selec-
ted for programming. Select the burner with which to
associate the timer using the “+” and “-” buttons. The
timer display will show 00.00, meaning that the timer of the selected burner is not activated.
Press the “key” button again. The fl ashing digits on the left of the dot indicate the hour and the
digits on the right indicate the minutes. Increase or decrease cooking time from 0 to 9 hours
using the “+” and “-” buttons. Hold down the “+” or “-” button to increase or decrease the hours
digits rapidly. To set the minutes, press the “key” button again. The digits on the right of the dot
start fl ashing. Set the minutes as described above for the hours.
When programming the cooking time you can cancel the current setting at any time by pressing
the “+” and “-” buttons simultaneously.
If the time is set to zero, the timer is deactivated. To confi rm the time displayed, press the “key”
button.
At this point the indicators exclusively of the burners with active timer will continue fl ashing. Press
the “timer” button to access programming mode and display the time remaining before the burner
switches off or change the current setting. If no button is pressed for more than 10 seconds,
the system automatically quits programming mode and restores the main display. Any settings
in progress on the selected burner are retained and the associated timer remains active. The
timer can be programmed with the burner OFF or ON, and it will start counting from when the
set cooking time is confi rmed. Once the set cooking time has elapsed, the timer-controlled burner
will switch off and a series of beeps will be emitted. Switching off a burner also deactivates the
associated timer (if programmed).