BOREAL LASER GasFinder FC, Operation Manual

Page: 20 / 88

3.6
Boreal Laser Inc. GasFinderFCr Operation Manual — Installation July 17th 2017
and twisting the tabs on the inside.
Remove the two locking screws for the bottom plate •
of the XY mount and raise the top two plates.Use the
two 8 x 32 x
3
/
4
” screws to fasten the remote head to
the mount.
Use the four ¼” x 20 x • 1 /
2
” screws to fasten the X-Y mount
to the stainless steel bottom plate.
Bolt the base mount to a structurally stable base (see • page 7.5),
and bolt the stainless steel enclosure with the Remote Head to
the base mount. Use the base mount to align it approximately
with the retro.
If the aiming scope is not already attached, fasten it to the Remote •
Head with the large end towards the operator.
Optical alignment
2 screws
8 x 32 x
3
/
4
”
Tabs
Nose
Front of enclosure
Assembled enclosure
Base mount
Four ¼” x 20 x 1 /
2
” screws
Two assembled enclosures mounted on a column