EN
15
Installation
www.bora.com
5 Installation
5.2 Checking the scope of delivery
X
X
Make sure the delivery is complete and check it for damage.
X
X
If there are any missing or damaged parts, please notify the
BORA After Sales Service.
X
X
Do not under any circumstances install parts which are
damaged.
X
X
Dispose of transport packaging in the proper manner (see the
“Decommissioning, disassembly and disposal” chapter).
Name
Quantity
Cooktop
1
Control knob
2
Operating and installation instructions
1
Cooktop mounting screws
4
Height adjustment plate set
1
Cooktop mounting straps
4
Control knob cable
2
Automatic extraction system cable
1
Special scope of delivery for glass ceramic cooktops
Glass ceramic cleaning instructions
1
Special scope of delivery for gas cooktops
Cast-iron grate
2
Nozzle set G20/20 mbar natural gas PKGDS2020
1
Flexible gas connection hose, length 500 mm, 1/2”
external thread (EN14800)
1
Cylindrical/conical transition piece
1
Seal
1
Tab. 5.1
Scope of delivery of the cooktops
5.3 Tools and aids
The following tools are required to correctly install the appliance:
X
O
pencil
X
O
tape measure or folding metre stick
X
O
standard or cordless drill with Ø 50 mm Forstner bit
X
O
black, heat-resistant silicone sealant
X
O
slotted screwdriver
X
O
size 20 Torx screwdriver
X
X
Observe all safety and warning information (see the “Safety”
chapter).
X
X
Follow the enclosed manufacturer’s information.
X
X
Please note the local regulations and connection requirements
applicable to gas cooktops.
X
X
Before connecting the appliance, check that the appliance
settings comply with local connection requirements (gas type
and pressure).
5.1 General installation instructions
i
The appliances must not be installed above cooling
devices, dishwashers, stoves, ovens, washing machines
or dryers.
i
The contact surfaces of the worktops and wall sealing
strips must be made of a heat-resistant material (up to
approx. 100 °C).
i
Worktop cut-outs must be moisture-sealed using suitable
means and, where necessary, fitted with a thermal
insulator.
i
External devices may only be connected to the cooktop
extractor connections provided.
i
Extremely bright lights aimed directly at the appliances
can cause colour variations in the appliances and are
thus to be avoided.
General installation instructions for cooktops
i
To ensure that the cooktops perform optimally at all
times, there must be sufficient ventilation beneath the
cooktops.
i
The performance of the cooktops is affected or the
cooktops overheat if the warm air beneath the cooktops
cannot escape.
i
If a cooktop overheats, the power is automatically
reduced or the cooktop is switched off completely (see
“Overheating protection”).
i
If cable protection (false floor) is planned beneath the
appliance, this must be fitted so it does not obstruct
ventilation.
X
X
Make sure that the area below the cooktop has a sufficient air
supply.
Summary of Contents for Pro PKG3
Page 41: ...EN 41 Notes www bora com 12 Notes...
Page 42: ...EN 42 Notes www bora com...
Page 43: ...EN 43 Notes www bora com...
