bora PKIW1 Operating And Installation Instructions Download Page 6

EN

6

Safety

www.bora.com

2  Safety

2.1  General safety instructions

INFO 

The appliance complies with the 

stipulated safety requirements. The 

user is responsible for appliance 

cleaning and maintenance as well as 

its safe use. Improper use can lead 

to personal injury and damage to 

 property.

Q

Q

The operating and installation instructions 

contain important information about 

 installation and operation. These enable you 

to protect yourself against injuries and 

 prevent damage to the appliance. Contact 

details for further information as well as 

 application and usage questions can be 

found on the back of these operating and 

installation instructions.

Q

Q

The term device applies to cooktops, 

 cooktop extractors and cooktops with 

cooktops extractors.

X

X

Read the operating and installation 

 instructions fully before using the appliance 

for the first time.

X

X

Always store the operating and installation 

instructions within easy reach so that they 

can be accessed if required.

X

X

Pass the operating and installation 

 instructions to the next owner if you sell 

the appliance.

X

X

Conduct all work extremely attentively and 

conscientiously.

X

X

Check the appliance for visible damage 

when unpacking it.

X

X

Do not connect a damaged appliance.

X

X

Only use the appliance once all installation 

activities are complete. This is the only way 

to ensure safe operation.

X

X

Make sure that hot hobs are not touched.

X

X

Avoid boiling over.

X

X

Pay attention to the residual heat display.

X

X

Switch the device off after use.

X

X

Do not rely on the pan size recognition.

X

X

Keep pets away from the appliance.

 

CAUTION!

Risk of injury from falling device 

components!

Falling device components such 

as pan supports, control elements, 

­covers,­grease­filters,­etc.­can­cause­

injuries.

X

X

Place device components safely 

near the devices after you remove 

them.

X

X

Make sure that none of the device 

components you have removed 

could fall.

Recirculation mode
INFO 

When cooking, additional moisture is 

released into the ambient air.

INFO 

In recirculation mode, only a slight 

amount of moisture is removed from 

the cooking vapour. 

X

X

When using recirculation mode, ensure a 

sufficient supply of fresh air, e.g. by 

 opening a window.

X

X

Ensure a normal and comfortable room 

 climate (humidity of 45–60%), e.g. by 

 opening natural ventilation openings or 

using domestic ventilation systems.

X

X

After every use in recirculation mode, 

switch the cooktop extractor to a low level 

for about 20 minutes or activate the 

 automatic after-run function.

Effect on pacemakers, hearing aids and 

metallic implants
INFO 

Induction cooktops generate a  high-

frequency electromagnetic field near 

the cooking zones. Coming too close 

to the cooking zones could have a 

negative influence or even cause 

malfunctions of pacemakers, hearing 

aids or metallic implants.  Issues with 

pacemakers are unlikely.

X

X

In case of doubt, please contact the 

 manufacturer of your medical device or 

your doctor.

Summary of Contents for PKIW1





































Reviews: