bora PKIW1, Operating And Installation Instructions

Page: 20 / 36

EN
20
Installation
www.bora.com
5.5.3 Installing the cooktop
3 2 1
Fig. 5.15 Inserting the cooktop
[1]
Connections for the control knob and automatic extraction
system (at the front)
[2]
Cooktop
[3]
Worktop cut-out
X X
Insert the cooktop [2] into the worktop cut-out [3].
X X
Precisely align the cooktop [2].
X X
Please note that during normal installation, the
connections for the control knob and the automatic
extraction system [1] are at the front.
INFO The device connector should be fed backwards.
Do this using the cable brackets provided.
1
2
Fig. 5.16 Cooktop and height adjustment plates
[1]
Cooktop
[2]
Height adjustment plates
X X
If applicable, insert the height adjustment plates [2].
X X
Vertically align the control knob in the 12 o’clock
position based on the markings.
X X
Tighten the fixing nut.
X X
Place the selector ring on the control knob.
Bore hole examples
≥70
90 90 90
Ø50 ±0,5
90 196 196
370 370 110
1 1
Fig. 5.13 Bore holes for 2 cooktops and 1 extractor
[1]
Bore holes for socket (2x external)
[2]
Bore holes for control knobs (5x)
[3]
Cooktop (2x)
[4]
Cooktop extractor
[5]
Worktop
[6]
Floor unit’s panel
≥70
90 90 90 90 90 196 196 196 196
370 370 370 110
1 1 1 1
110
Ø50 ±0,5
Fig. 5.14 Bore holes for 3 cooktops and 2 extractors
[1]
Bore holes for socket (2x external)
[2]
Bore holes for control knobs (8x)
[3]
Cooktop (3x)
[4]
Cooktop extractor (2x)
[5]
Worktop
[6]
Floor unit’s panel