EN
29
Cleaning and maintenance
www.bora.com
7.4 Cleaning the control knobs
1
2
3
Fig. 7.1
Pull out the knob ring
[1]
Knob casing
[2]
Touch surface
[3]
knob ring
7.4.1 Cleaning the knob ring
The knob ring can only be cleaned by hand.
X
X
Remove the knob ring from the knob housing.
X
X
Use a cleaner and degreaser in one.
X
X
Rinse the knob ring in hot water.
X
X
Clean the knob ring with a soft brush.
X
X
Rinse the knob ring well after cleaning.
X
X
Dry the knob ring carefully.
X
X
Place the dry knob ring back on the knob housing.
X
X
Make sure it is positioned correctly (0 position).
X
X
If necessary, twist the knob ring to the 12 o’clock
position (= 0 position).
7.4.2 Cleaning the touch surface and the
knob housing
X
X
Pull off the knob ring.
X
X
Clean the touch surface and the knob housing with a
soft, damp cloth.
X
X
Dry the touch surface and the knob housing carefully.
X
X
Place the knob ring back on the knob housing.
INFO
If the knob ring has not been fitted correctly, a
segment rotating clockwise is displayed in the
central control knob display .
Summary of Contents for PKIW1
Page 33: ...EN 33 Notes www bora com 11 Notes...
Page 34: ...EN 34 Notes www bora com...
Page 35: ......
