bora PKA1UMEN-001 Operating And Installation Instructions Download Page 4

EN

4

General information

www.bora.com

1  General information

Target group

These operating and installation instructions apply for the 

following target groups:

Target group

Requirements

User

The appliance can be used by children 

aged 8 and above as well as people with 

reduced physical, sensory or mental 

capacities or a lack of experience and/or 

knowledge if they are supervised or have 

been instructed how to safely use the 

appliance and understand the resultant 

risks. Children must be supervised. All 

safety and warning information and the 

handling instructions in the installation 

instructions must be complied with.

Ambitious DIYers

Ambitious DIYers can independently 

conduct all joinery and installation work 

providing they possess the necessary 

skills and expertise. They must never 

independently establish electricity and 

gas connections.

Installation specialists Installation specialists are authorised 

to conduct all joinery and installation 

work in line with existing regulations. The 

electricity and gas connections must be 

certified by a certified engineer for the 

applicable trade prior to commissioning.

Electricians

The electrical connection may only be 

 established by a certified engineer.  

He/she also assumes responsibility for 

the proper electrical installation and 

commissioning.

Gas specialists

The gas connection may only be 

 established by certified engineers.  

They also assume responsibility for 

 proper installation and commissioning of 

the gas system.

Tab. 1.1  Target groups

INFO

 

BORA Holding GmbH, BORA Vertriebs GmbH 

& Co KG, BORA APAC Pty Ltd and BORA 

Lüftungstechnik GmbH - hereinafter referred 

to as BORA - do not assume any liability for 

damage arising from non-adherence to these 

documents and from improper assembly! The 

electricity and gas connections must be made 

by a qualified specialist. Installation must 

 comply with the valid standards, regulations 

and laws. All safety and warning information 

and the operating and installation instructions 

must be complied with.

Validity of the operating and 

installation instructions

These instructions apply to several device versions. It is 

therefore possible that some of the features described do 

not apply to your appliance.

Other applicable documents

These operating and installation instructions are valid 

in conjunction with other documents, which must be 

adhered to.

Please be sure to adhere to all documents that form part 

of the scope of delivery.

INFO

 

BORA accepts no liability for damage caused 

by failure to comply with these documents!

Directives

These devices meet the following EU/EC directives:

2014/30/EU EMC Directive 

2014/35/EU Low Voltage Directive 

2009/125/EC Ecodesign Directive 

2010/30/EU Energy Consumption Label Directive

2011/65/EU RoHS Directive

2012/19/EU WEEE Directive

Summary of Contents for PKA1UMEN-001













































Reviews: