EN
20
Installation
www.bora.com
X
X
Use a Torx 20 screwdriver to tighten the mounting
clamps slightly from underneath.
X
X
Verify that the alignment is correct.
X
X
Once all of the installation work is complete, seal the
device with black, heat-resistant silicone sealant.
6.5.4 Duct connection dimensions
245
294
89
126
Fig. 6.16 PKA duct connection dimensions with angled ducting
piece
245
270
126
89
Fig. 6.17 PKA duct connection dimensions with straight ducting
piece
265
Fig. 6.18 PKA duct connection dimensions with straight ducting
piece
X
X
Depending on the installation type, twist the mounting
clamps to the left or right (flush mounting or surface
mounting).
Securing the cooktop extractor
INFO
The cooktop extractor is secured using the four
mounting clamps provided, for which there are
4 alternative positions on the holding plate.
2
3
1
Fig. 6.14 Push on mounting clamps
[1]
Alternative position for mounting clamp
[2]
mounting clamp
[3]
Cooktop extractor
X
X
Push the mounting clamps [2] into the holders
provided on the cooktop extractor [3] or the alternative
positions on the holding plate [1].
Fig. 6.15 Tighten the mounting clamps
Summary of Contents for PKA1UMEN-001
Page 43: ......
