EN
33
Operation
www.bora.com
7 Operation
X
X
Observe all safety and warning information during
operation (see the Safety section).
INFO
The cooktop extractor must only be operated
with BORA cooktops.
INFO
The cooktop extractor can only be operated if
the grease filter components are installed.
7.1 General operating instructions
The cooktop extractor is controlled using the control knob.
There are 9 power levels, 1 power setting and various
functions available:
A0
/
C
P
9
8
7
6
5
4
3
2
1
c
0
Fig. 7.1
Knob ring assignment
Knob ring position
Function
0
Fan off
c
Cleaning position
1 - 9
Power levels
P
Power setting
A0
Automatic cooktop extractor function
C
Configuration menu (see the Installation
section)
Tab. 7.1 Knob ring positions
7.2 Operating the cooktop extractor
Recommendations for efficient vapour extraction
X
X
Always use a lid on pots that are particularly high. This
ensures effective vapour extraction. It also reduces
power consumption.
X
X
Only operate the cooktop extractor at the minimum
power level required for effective vapour extraction.
This enables you to improve the performance of the
odour filters in recirculation mode.
X
X
Only operate the hob at the minimum power level
required for cooking. This reduces the cooking vapours
and the power consumption.
X
X
Avoid strong drafts.
7.2.1 Switching on the cooktop extractor
Fig. 7.2
Switching on the cooktop extractor
X
X
Turn the knob ring from the 12 o-clock position to
the power level you want. The knob clicks in at the
different levels.
X
X
Avoid undefined interim positions.
INFO
If the control knob ring is turned to an
undefined interim setting, the most recently
selected power level is automatically activated.
Adjusting the power level
X
X
Turn the knob ring to the desired power level.
Q
Q
The power level selected is shown in the power display
on the control knob.
Set power setting
X
X
Twist the knob ring to the 10 o’clock position.
Q
Q
The cooktop extractor will run for a maximum of
9 minutes on the power setting. P is displayed on the
power display on the control knob.
7.2.2 Automatic cooktop extractor function
INFO
The extraction power is generally adjusted
30 seconds after the power level is set on the
cooktop.
X
X
Twist the knob ring to the 11 o’clock position.
Q
Q
If now power level is yet set on one of the cooktops
connected,
A0
is shown on the control knob display.
Q
Q
If, for example, one of the cooktops connected is set
to power level
7
, then the display changes to
A7
and
the extraction power is automatically adjusted with a
30 second delay.
Q
Q
If all the cooking zones connected are switched off or
temporarily stopped, the automatic after-run starts.
Deactivate automatic cooktop extractor function:
X
X
turn the knob ring to a power level, the power setting
or the 12 o-clock position.
Summary of Contents for PKA1UMEN-001
Page 43: ......
