11
... Installation
Installation
■
The use of solid timber wall strips behind the built-in cooktop on the worktop is
permissible, provided the required minimum distances are maintained.
■
The use of plastic wall strips is not permissible.
■
Changes in the surface colour normally result from the effect of light.
Flush installation of hob
►
Place the cooktop in the cut-out. Seal
the gap between the cooktop and the
hob
with
a
temperature-resistant
silicone adhesive. Remove excess
silicone adhesive with a putty knife.
Installation of the hob in the worktop cut-out
►
Place the cooktop in the cut-out and secure it with the clamps.
The BORA logo must be positioned in the rear right corner of the built-in hob.
1
0
4
0
1
0
-
4
0
temperature-resistant
silicone adhesive
