bora CKCB Installation Instructions Manual Download Page 4

EN

4

General information

www.bora.com

1  General information

1.1  Target group

These installation instructions apply to the following 

target groups:

Target group

Requirements

Ambitious DIYers

Ambitious DIYers can independently 

conduct all joinery and installation work 

providing they possess the necessary 

skills and expertise. They must never 

independently establish electricity and 

gas connections.

Installation specialists Installation specialists are authorised 

to conduct all joinery and installation 

work in line with existing regulations. 

The electricity and gas connections must 

be certified by a certified engineer from 

the applicable specialist field prior to 

commissioning.

Electricians

The electrical connection may only be 

established by a certified engineer. He/

she also assumes responsibility for 

the proper electrical installation and 

commissioning.

Qualified gas 

technicians

The gas connection may only be 

established by a certified tradesperson. 

He/she also assumes responsibility 

for the proper gas installation and 

commissioning.

Tab. 1.1  Target groups

INFO 

BORA Holding GmbH, BORA Vertriebs GmbH 

& Co KG, BORA APAC Pty Ltd and BORA 

Lüftungstechnik GmbH – hereinafter referred to 

as BORA – do not assume any liability for damage 

arising from disregard for or non-adherence to 

these documents and improper installation! The 

electricity and gas supply must be connected 

by a certified specialist. Installation may only 

be carried out in accordance with the applicable 

standards, regulations and laws. All safety and 

warning information, as well as the handling 

instructions in the operating and installation 

instructions must be observed.

1.2  Validity

These instructions apply to several appliance versions. It 

is therefore possible that some of the features described 

do not apply to your appliance. The details of the figures 

contained herein may differ from some appliance versions 

and are to be understood as schematic diagrams.

1.3  Other applicable documents

These instructions are valid in conjunction with other 

documents, which must be adhered to.

Please by all means adhere to all documents that form 

part of the scope of delivery.

INFO 

BORA do not assume any liability for damage 

arising from non-adherence to these documents.

Directives

The appliances meet the following EU/EC directives:

2014/30/EU EMC Directive 

2014/35/EU Low Voltage Directive 

2009/125/EC Ecodesign Directive 

2011/65/EU RoHS Directive

2012/19/EU WEEE Directive

Cooktop extractors also meet the following EU/EC 

directives:

2010/30/EU Energy Labelling Directive

Regulations

Gas appliances meet the following EC directives:

(EU) 2016/426 regulation on appliances burning gaseous 

fuels

1.4  Data protection

During operation your cooktop extractor saves 

pseudonymised data such as menu settings entered by 

you, operating hours of the individual technical units and 

the number of functions selected. Furthermore, your 

cooktop extractor documents errors in combination with 

the number of operating hours.

The data can only be read manually via your cooktop 

extractor, thus the decision is yours.

The saved data then enable a rapid error search and 

troubleshooting in case of service.

Summary of Contents for CKCB





































Reviews: