EN
22
Gas installation
www.bora.com
Perform minimum setting:
Natural gas (NG)
Prerequisites:
Q
Q
Use of G20 nozzles.
Q
Q
It is not necessary to set up the primary air for the gas
burner.
X
X
Ignite the gas burner and set the control knob to the
minimum setting (small flame).
X
X
Remove the control knob by pulling it upwards.
X
X
Use a screw driver to turn the throttling screw [1] to
the right or left in order to adjust the flame correctly.
X
X
Put the control knob back on.
X
X
Ensure that the flame does not go out when changing
between the maximum and minimum setting on the
gas burner.
Liquid gas (LPG)
Prerequisites:
Q
Q
Use of G30/G31 nozzles.
Q
Q
The gas burners do not require the primary air to be set.
X
X
Remove the control knob by pulling it upwards.
X
X
Turn the throttling screw until it stops.
X
X
Put the control knob back on.
X
X
Ensure that the flame does not go out when changing
between the maximum and minimum setting on the
gas burner.
6.5 Handover to user
Once installation is complete:
X
X
Explain the main functions to the user.
X
X
Explain all safety-related aspects of operation and
handling to the user.
X
X
Provide the user with the accessories and operating
and installation instructions to be kept in a safe place.
Changing the gas burner nozzle in the gas
burner:
X
X
Remove the pan support.
X
X
Remove the gas burner cover
1
2
Fig. 6.3
Cooktop burner with gas burner nozzle
[1]
Gas burner
[2]
Gas burner nozzle
X
X
Unscrew the gas burner nozzle [2] from the gas burner
[1]
X
X
Screw the corresponding nozzle for the gas type to be
used into the gas burner [2].
X
X
Position the gas burner cover correctly on the gas
burner [1] so that it lies flat.
X
X
Affix the new labelling for the gas type used (natural
gas/liquid gas) to the nameplate on the underside of
the appliance.
X
X
Install the corresponding gas connection for natural
gas (NG) or liquid gas (LPG). See the Gas connection
section in this chapter.
6.4.1 Setting up gas taps
1
Fig. 6.4
Set the gas tap
[1]
Throttling screw
Summary of Contents for CG11
Page 31: ......
