EN
18
Operation
www.bora.com
6.1.5 Switching the power setting off early
X
X
Continue pressing until the lower power level that
you want is displayed.
6.1.6 Switching off the cooking zone
INFO
If a cook zone indicator shows
H
, the cooking
zone is still hot.
X
X
Continue pressing or until the cooking zone
indicator displays power level
0
. The display will show
a
0
for a few seconds.
X
X
Press and simultaneously.
6.1.7 Pause function
INFO
The pause function switches off automatically
after 10 minutes.
X
X
Press the pause button on the cooktop to interrupt
the cooking session for a short time.
Q
Q
II
is displayed in the cooking zone indicator.
X
X
Press the pause button again and then the or
to end the pause function.
By pressing the button when the pause function is
active, the previous setting can be activated again within
6 seconds.
To do so, press the button and then .
6.1.8 Automatic heat up function
Switching on the automatic heat up function
Prerequisite
Q
Q
The cooktop is switched on.
Q
Q
All cooking zones are switched off.
X
X
Press the and buttons on the cooktop.
X
X
Use the button to select (within 5 seconds) the
desired power level (continuous cooking stage), which
should be used to continue the cooking session after
the end of the automatic heat up function.
Q
Q
The cooking zone indicator will display the symbol
A
to
show that the automatic heat up function is activated
and the continuous cooking stage set, for example
5
.
Q
Q
If a higher continuous cooking stage is selected during
the automatic heat up function, the new duration of
the selected stage will automatically be taken over.
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
X
X
press the on the cooking zone.
X
X
activate the power setting HY.
6 Operation
X
X
Observe all safety and warning information during
operation (see Safety chapter).
INFO
The cooktop may only be operated when the
stainless steel grease filter of the cooktop
extractor is installed (see operating instructions
for cooktop extractor).
INFO
Clean the cooking zone before using the cook-
top for the first time (see Cleaning chapter).
6.1 Switching cooktop on/off
Switching on
X
X
Press to switch on the cooktop. The power level
0
is displayed in the cooking zone indicators.
Q
Q
If no power level is set after switching on the device,
the cooktop will turn off after a few seconds.
Switching off
INFO
Use the operating panel to switch off the
cooking zone after use.
X
X
Press to switch off the cooktop.
X
X
Pay attention to the residual heat display
(see Device Description chapter).
6.1.1 Switching on the cooking zone
X
X
Press the button for the desired cooking zone. The
0
in the cooking zone indicator lights up more brightly.
6.1.2 Adjusting the power level
X
X
Press to set power level
5
to set power level
9
.
6.1.3 Changing the power level
X
X
Press or until the required power level is shown
in the cooking zone indicator.
6.1.4 Switching on the power setting
INFO
The back cooking zone is equipped with a
power-enhancing power setting.
If the cooking zone is operated with the power setting
HY
,
the operation of the other cooking zones is possible up to
a maximum power level of
5
.
If the power setting is increased to
5
, the power level will
switch back to
P
.
X
X
Continue pressing until power level
HY
is displayed
in the cooking zone indicator.
Summary of Contents for CCH1
Page 25: ...EN 25 Notes www bora com EN 11 Notes...
Page 26: ...EN 26 Notes www bora com...
Page 27: ......
