GB
35
Cleaning and maintenance
www.bora.com
3
2
1
Fig. 8.2
Removing the stainless steel grease filter
[1]
Stainless steel grease filter
[2]
Handle
[3]
Suction opening
X
X
Grab the stainless steel grease filter using the handle
[2].
X
X
Pull the stainless steel grease filter [1] out of the suc-
tion opening [3] upwards.
8.4.2 Cleaning the air inlet nozzle and
stainless steel grease filter
INFO
Clean the stainless steel surfaces in the pol-
ishing direction only.
INFO
If the stainless steel grease filter can no
longer be cleaned completely, this means the
stainless steel grease filter will need to be
replaced.
Manual cleaning
X
X
Use a degreasing cleaning agent.
X
X
Rinse the inlet nozzle and stainless steel grease filter
with hot water.
X
X
Use a soft brush to clean the inlet nozzle and stainless
steel grease filter.
X
X
After cleaning, rinse the inlet nozzle and stainless steel
grease filter well.
Cleaning in the dishwasher
X
X
Rinse the air inlet nozzle and the stainless steel grease
filter with a rinsing program at a maximum of 55 °C.
Discolourations to the cooktop arise from residues which
are not removed and have been burnt in.
Glossy spots are caused by the abrasion of the pot base,
especially when using cooking utensils with aluminium
bases, or by unsuitable cleaning agents. They are very
hard to remove.
8.4 Cleaning the cooktop extractor
The air inlet nozzle and the stainless steel grease filter ab-
sorb the greasy components of the kitchen vapour.
X
X
Make sure that the cooktop and cooktop extractor are
switched off (see Operating chapter).
X
X
Wait until the fan display is 0.
X
X
Clean the cooktop extractor in accordance with the
cleaning cycles (see Tab. 7.1).
X
X
Clean the surfaces of the exhaust air system using a
soft damp cloth, detergent or a mild window cleaning
agent.
X
X
Soften dried-on dirt residues using a damp cloth (do
not scratch!).
8.4.1 Removing the air inlet nozzle and
stainless steel grease filter
2
1
Fig. 8.1 Removing the air inlet nozzle
[1]
Air inlet nozzle
[2]
Access opening
Prerequisite:
The fan level indicator indicates
0
.
X
X
Reach into the access opening [2] with your hand.
X
X
Remove the air inlet nozzle [1] out upwards.
Summary of Contents for BIA
Page 43: ......
