GB
18
Assembly
www.bora.com
6.2 Tool and aids
The following tools are required for the correct installation
of the cooktop:
Q
Q
Pencil
Q
Q
Drill or cordless drill with a 5 mm wood bit (for the
back wall)
Q
Q
Compass saw or handsaw
Q
Q
Drilling template for cut-out on back wall (included)
Q
Q
Phillips screwdriver Z2
Q
Q
Silicone sealing compound for sealing cutting surfaces
6.3 Assembly instructions
6.3.1 Safety distances
X
X
Maintain the following safety distances:
1
3
2
Fig. 6.1 Recommended minimum clearances
[1]
Minimum distance of 50 mm at the back between worktop
cut-out and the rear edge of the worktop.
[2]
Minimum distance of 50 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall. For ergo-
nomic reasons and to ensure efficient cooktop extraction, a
minimum clearance of 300 mm is recommended.
[3]
Minimum distance of 700 mm between the worktop and the
wall unit. A minimum clearance of 1000 m is recommended
for ergonomic reasons.
6 Assembly
X
X
Observe all safety instructions and warnings
(see Safety chapter).
X
X
Follow the enclosed manufacturer's information.
INFO
The mains connection cord must be provided
by the customer.
INFO
The device may not be installed above cooling
devices, dishwashing machines, stoves, baking
ovens as well as washing and drying machines.
INFO
The contact surface of the worktops and the
wall sealing strip must be made of a heat-re-
sistant material (up to approx. 100 °C).
INFO
Worktop cut-outs must be moisture-sealed
using suitable means and, where necessary,
fitted with a thermal insulator.
INFO
The integrated cooktop extractor must not be
used with other cooktops.
6.1 Checking the scope of delivery
Name
Quantity
Induction glass ceramic cooktop with inte-
grated cooktop extractor
1
Stainless steel grease filter
1
BAKF activated charcoal filter
2
Flexible duct (only BIU)
1
EURO screws (only BIU)
6
Duct extension for extracted air, horizontal
BLAVH (only BIA)
1
Mounting brackets
5
Sealing tape
1
Glass ceramic scraper
1
Cable routing clips
3
Operating and assembly manual
1
Lenshead screws
5
Drilling template
1
Height compensation plate set
1
Tab. 6.1: Scope of delivery
X
X
Check the scope of delivery for damage and make
sure it is complete.
X
X
If there are any missing or damaged parts, please
notify BORA Customer Services immediately.
X
X
Do not under any circumstances install parts which
are damaged.
X
X
Dispose of transport packaging in the proper manner
(see Decommissioning, Disassembly and Disposal
chapter)
Summary of Contents for BIA
Page 43: ......
