EN
36
Cleaning and maintenance
www.bora.com
X
X
Using both hands, position the housing base [5] so that
the position of the locking straps [4] on the housing base
match the position of the hooks [3] on the housing.
X
X
Insert the housing base at the sealing groove [2] of the
air guiding housing [1].
X
X
Press the housing base [5] upwards until the 4 locks
(2 front, 2 rear) engage into the hooks [3].
X
X
Check that all 4 locking straps [4] have correctly engaged.
8.6 Replacing the activated charcoal
filter
Two activated charcoal filters are used only when the
cooktop extractor is being operated in recirculated
air mode. The activated charcoal filter binds odorous
materials which arise during cooking.
INFO
The activated charcoal filters must be replaced
when the fan level indicator indicates
F
(filter service
display).
BAKF activated charcoal filters can be pur chased
from your specialist.
You can also contact BORA on its homepage
http://www.bora.com.
X
X
Make sure that the cooktop and cooktop extractor are
switched off (see Chapter 6.1).
X
X
Wait until the fan display is
0
.
1
2
1
3
Fig. 8.5
Releasing the activated carbon filter housing lid
[1]
Outer locks
[2]
Middle lock
[3]
Activated carbon filter housing cover
1
1
2
2
3
4
Fig. 8.3
Opening the air guiding housing
[1]
Rear locks
[2]
Front locks
[3]
Housing base
[4]
Air guiding housing
X
X
Hold the housing base with one hand [3].
X
X
Open both locks on the rear [1].
X
X
Open both front locks [2].
X
X
Remove the housing base [3].
X
X
Clean the air guiding housing [4] and the housing base
[3] with a mild cleaning agent.
8.5.2 Closing the air guiding housing
1
2
3
4
5
Fig. 8.4
Closing the air guiding housing
[1]
Air guiding housing
[2]
Sealing groove
[3]
Hooks
[4]
Locking strop
[5]
Housing base
Summary of Contents for BHA
Page 41: ...EN 41 Notes www bora com 12 Notes...
Page 42: ...EN 42 Notes www bora com...
Page 43: ......
