EN
29
Assembly
www.bora.com
X
X
Based on the relevant connection diagram (see
Figs. Connection diagram), connect the power supply
line to the power connection [2] on the cooktop with
integrated cooktop extractor.
X
X
For one- or two-phase-connections install the relevant
contacts with the BKAS connector clip (included in the
scope of delivery).
X
X
Fasten the cable mounting clips [3] in the designated
bore holes (1) either on the left or right hand side for
the cable routing to the rear.
X
X
Make sure that the cable is not clamped or damaged
and cannot touch any hot parts of the cooktop.
X
X
Verify that the installation was done correctly.
X
X
Switch on the main switch/automatic circuit breaker.
X
X
Put the cooktop extractor into operation (see the
Operation chapter).
X
X
Check all the functions are working correctly.
6.9 Handover to user
Once installation is done:
X
X
Explain the important functions to the user.
X
X
Explain all safety-relevant aspects of operation and
handling to the user.
X
X
Provide the user with the accessories and operating
and installation instructions to be kept in a safe place.
Summary of Contents for BHA
Page 41: ...EN 41 Notes www bora com 12 Notes...
Page 42: ...EN 42 Notes www bora com...
Page 43: ......
