PMX40 RF Power Meter – INSTRUCTION MANUAL
4-2
4.3
Parameter Data Entry and Selection
The PMX40 RF Power Meter parameters can be changed in various ways depending on the type of
parameter being addressed.
4.3.1
Numerical Data Entry
Numerical data can be incremented/decremented by selecting the “+” and “–“ icons with the front
panel keys or by touching them. Selecting the numeric setting brings up an on-screen numeric keypad
similar to the one shown in Figure 4-2.
Figure 4-2. Channel 1 Vertical Center Numeric Keypad
4.3.2
Parameter Pick-List Selection
Some parameters use a menu or pick-list of settings to choose from. The Trigger source setting seen in
Figure 4-3 is an example of a pick-list. Use the arrow up and down icons to cycle through the settings or
select the value to bring up the pick-list to choose from.
Figure 4-3. Trigger Source Pick-List
