PMX40 RF Power Meter – INSTRUCTION MANUAL
2-1
2
Installation
This section contains unpacking and repacking instructions, power requirements, connection
descriptions, and preliminary checkout procedures.
2.1
Unpacking & Repacking
The PMX40 RF Power Meter is shipped complete and is ready to use upon receipt. Figure 2-1 shows you
the various pieces included in the packaging and the order in which they are loaded into the container.
Actual details may vary from the illustration.
Note
Save the packing material and container to ship the instrument, if necessary. If the
original materials (or suitable substitute) are not available, contact Boonton Electronics
to purchase replacements. Store materials in a dry environment.
Figure 2-1. Packaging Diagram
Table 2-1. PMX40 RF Power Meter Packing List
PMX40 RF Power Meter
Line Cord
Information Card (describes where to download the latest manual, software, utilities)
For benchtop use, choose a clear, uncluttered area. Ensure that there is at least 2" of clearance at the
fan air intake on the rear panel and the exhaust vents on the side panels. Pull-down feet are located on
