29
Item Display
Setting Value
Contents of Setting
Number of
Communication Output
Number of communication output
shall be set.
0.01: 0.01 sec/time
~
9.99: 9.99 sec/time
Data is transmitted for each set
time interval.
Warning :
Transmission is not
conducted with the setting of 0.00
and there may be an overlapping
of transmission packet when
communication speed is set to be
slow in high speed transmission.
In case of setting transmission
speed is conducted as 9600bps or
lower, it shall be set as 0.1 sec or
longer.
Int :
0.10
Stream mode
setting range
0.01 ~ 9.99
Recall :
Command mode
(transmission mode
upon data request)
Refer to communication format
(Page 54~56)
Communication format
Select communication format.
Warning : In case of AND Format
setting, command mode is same as
the 12-2-2 command mode.
bS3520 : BONG SHIN Format
And : AND Format
Communication
RS-422/485 setting
Select RS-422/485 communication.
Warning : After changing from
RS-485 to RS-422, turn the power
off and then use is after turning it on.
Please use it after checking the
output pin no.
r S-422 :
RS-422
r S-485 :
RS-485
:
Initial
Value
Since
entry
to
setting
mode
is
unavailable
from
Key
Lock
status,
it
shall
be
executed
after
canceling
the
key
lock.
There
may
be
a
change
in
display
of
setting
range
based
on
location
of
decimal
point.
Item
to
set
DAC
is
not
displayed
when
selecting
BCD
option.
Function
setting
value
can
be
initialized
at
check
mode.
