4. OILING
Oiling of all moving parts is imperative before each operation of this machine. The oiling points are
marked in red, spray lube the looper area after blowing off debris from the looper chamber. Use Bond spray
lube, stock# 21325
.
5. OPERATION
1. Hold the machine at the handle with your right hand.
2. Support the carpet with your left hand.
3. To start binding the carpet, align one corner of the carpet into the tape folder guide mouth, pull the
trigger switch and slowly feed the carpet through the folder mouth. Let the machine move towards you
without helping it pull through the carpet.
4. When you get to the other end of the carpet, continue binding on the tape until the carpet has passed the
rear feed rollers/pullers. Cut off the tape ½” past the corner.
5. Continue binding the next side of the carpet.
6. Let the machine pull itself. If you pull the machine faster than its speed, the binder will mis-stitch or
break the needle.
7. This machine has variable speed trigger switch. For more speed, squeeze the switch more; for slower
speed, squeeze less. Turn and adjust speed control knob located at the trigger switch until the desired
speed is found.
- 5 –
