78
1. Rear Springs — Comfort
IMPORTANT:
Make sure that all objects to be transported are in
place in storage compartment and rear rack.
Grab rear bumper and lift until suspension is fully extended. From this
point, rear of snowmobile should collapse by 50 to 75 mm (2 to 3 in)
when driver and passenger (if so applicable) take place. Measure at
rear bumper as shown in next photo.
TYPICAL — PROPER ADJUSTMENT
A. From fully extended, rear of suspension has collapsed by 50 to 75 mm (2 to 3 in)
WARNING
Do not attempt to lift the vehicle by hand alone. Use appropri-
ate lifting device or have assistance to share lifting stress in
order to avoid risk of strain injuries.
A32F0BA
A
mmo2005-001b_3.fm Page 78 Friday, November 21, 2003 12:28 PM
