Bomar Workline 510.350 DG, Operating Instructions Manual

Page: 55 / 105

55
Údržba stroj
e
Wartu
ng
Machine service
3. Pull off the wheel from the shaft by means of the three-armed puller.
4. Install the wheel on the shaft. Insert the feather to the groove.
5. Screw on the preparation to the wheel stretching to the hole in the shaft. Pull on
the wheel on the shaft.
6. Screw on washer and screw back.
7. Install the saw band. Wheel replacement is ready.
4.10.6. Cooling pump replacement
Only a qualified worker can carry out the connection!
High-voltage shock may have fatal results
1. Pull the tank with the liquid from the pedestal..
2. Remove the hosepipe leading to the cooling agent from the plug on the pump.
Screw off four screws from the cooling pump flange and pull out the pump from
the sheet metal holder.