Version 1.05 / June 2008
BOMAR, spol. s r.o.
Extend 900.720
Těžební 1236/1
62700 Brno
CZECH REPUBLIC
30
13.
Band saw adjusting
13.1. Safety notes
Keep the safety notes! Work the machine with the
highest safety!
Wear protective boots!
Falling cut pieces can cause serious injuries.
Wear protective hardhat!
Falling work pieces can cause severe head injuries.
13.2. Saw frame lift stop setting
If you want to shorten the time of operations in automatic
cycle, you have to adjust the height of the saw arm according
to the height of the cutting material.
1)
Saw arm adjusting is sensed by the sensor.
2)
By button
8
„The saw arm is up“, you have to go out
in the most high position.
3)
Insert the material to the vice and you carefully sink
with the saw arm on the material using button
9
“Saw
arm down”. Eventually by combination buttons
8
and
9
– fast feed.
4)
You must adjust the saw arm 10mm ab ove the
material.
5)
Adjust arm stop length just above the sensor
– shift
stop length by turning arrestment wheel hard upon
the sensor.
