Version 1.05 / June 2008
BOMAR, spol. s r.o.
Extend 900.720
Těžební1236/1
62700 Brno
CZECH REPUBLIC
25
10.
Preparative mode
10.1. Entrance to menu
Press button
5+6+7+8+9
together. Hydraulic must be off.
10.2. Cutting parameters
You can select, if you want to stop the saw band drive in
upper or lower position of the saw arm, or do not stop the
drive.
If you strain button
6
, the saw band drive will be stopped
in
the bottom
position of the saw arm or
in the top
position.
10.3. Interrupting the cycle selection
Press button
6
to preselect the cycle interrupt.
Press button
9
to move to the next menu
10.4. Vice parameters (vice opening)
1)
Press button
9
to entrance to menu: Vice parameters.
2)
By repeated pressing button
6
you select: up
– not - down
release.
Press button
9
to move to the next menu
10.5. Stop time of the hydraulics
1)
Press button
9
to move to this menu.
2)
To set the stop time, press button
6: up- down
– no
loosen
Press button
9
to move to the next menu
10.6. Swarf conveyor
Swarf conveyor will be automatic stoped and starting with
saw band drive.
10.7. Language version selection
By repeated pressing button
6
, select the language.
Press button
9
to ending Preparative mode.
