Version 1.05 / June 2008
BOMAR, spol. s r.o.
Extend 900.720
Těžební1236/1
62700 Brno
CZECH REPUBLIC
27
11.1. Cycle breaking
11.1.1. STOP button
Semi-
automatic cycle is interrupted by pressing button „
5
“
(
STOP
of the semi-automatic cycle).
The arm is lifted to the top position and the saw band drive is
stopped.
By pressing button „
4
“ (
START
of the semi-automatic cycle),
you can start the cycle.
11.1.2. TOTAL STOP button
In case of the risk, press button
TOTAL STOP
„
10
“.
After pressing
TOTAL STOP
button, saw band drive is
immediately broken and the arm sinking is stopped.
Reactivation:
1)
Turn button
TOTAL STOP
according to the arrows (on the
button).
2)
Switch on the safety circuit by button „
2
“.
3
)
By pressing button „
4
“ (
START
of the semi-automatic
cycle), you can start the cycle. The arm is lifted to the top
position and the saw band starts the cycle.
