21
Troubleshooting
Before you contact an authorized specialist.
The following problems can be solved by you by checking for the possible cause.
Problem
Cause/action
The appliance does not function/start.
- Check the power supply.
- Is the appliance switched on or a programme selected?
- Have you pressed the START/PAUSE button?
- Check the maximum capacity guidelines.
The housing is hot or there is a smell of
burning.
- The lint filter is blocked and must be cleaned.
- The condenser must be cleaned.
Unusual odours and powerful vibrations.
- The appliance must stand on a solid base.
- Are the screw-in feet aligned?
Fabrics are too dry.
- Check the maximum capacity guidelines.
- Was the washing removed in time?
- The washing was not properly sorted.
- Set the correct temperature.
Fabrics are misshapen.
Always follow the instructions on the care label of your fabrics.
Error messages
Display indicator
Cause of problem
Action
Lint filter is blocked
Clean or unblock the lint filter and if necessary, the vents
and restart the appliance.
Condenser water tank is full
Empty the condenser water tank.
E30
Problem with heating element or thermostat
Call a specialist.
E32
Problem with moisture sensor
E33
Problem with temperature sensor
E34
NOTE:
If a problem still persists after following the steps above, contact your distributor or an authorized technician.
Technical Data
for household tumble dryers in compliance with:
Delegated Regulation (EU) No. 392/2012
Model
WTK 5020
Rated capacity
8 kg
Dryer type
Condenser
Energy efficiency class1
1)
B
Energy consumption
Annual energy consumption
2)
kWh/year
561
Automatic tumble dryer
yes
Energy consumption standard programme
- with full load
kWh
4,74
- with partial load
kWh
2,56
Power consumption in off-mode
W
0,28
Power consumption in left-on mode
W
1,72
Duration of the left-on mode
Min.
10
Standard programme
3)
Standard cotton
Summary of Contents for WTK 5020
Page 24: ...Stand 08 14 WTK 5020...
