![background image](http://html1.mh-extra.com/html/bomann/wtk-5020/wtk-5020_instruction-manual_2785606017.webp)
17
Drying advice
CAUTION: DO NOT dry in the appliance!
• Fabrics which are not tumble-dryer safe. Always follow the instruc-
tions on the care labels of your fabrics.
• Washing that has not been washed and spun.
• Washing stained with cooking oil, acetone, alcohol, fuel, petrol,
kerosene, stain remover, turpentine, wax, or wax remover. This
must be washed first in the washing machine with hot water and
detergent before drying.
• Objects such as foam rubber (latex), shower caps, waterproof
fabrics, rubberised items, and items of clothing or pillows with foam
rubber flakes.
• Softeners or similar products should be used as specified in the
softener instructions.
• The last section of the drying cycle is done without heat (cool down
cycle) to ensure that the items of washing remain at a temperature
which does not lead to the washing being damaged.
• Remove all objects from pockets, such as matches and lighters.
• Close zips, buttons, or hooks before drying. Tie loose straps or loops
together.
Putting the washing into the dryer
• Shake out the washed fabrics and sort them according to
the required drying setting, fibre, and fabric type, size, as
well as remaining moisture after spinning. This will make
the drying very consistent.
• Each load should correspond to the rated capacity of the
appliance.
• Ensure that no items of washing are trapped in the door.
Control panel
1 On/Off
This button is used to switch the power supply on and off.
2 Program selector
A total of 12 programs can be set via the program selector.
Turn the selector clockwise or anti-clockwise to select the
required drying program. More details on the programs can
be found in the “Drying programme table”.
Automatic drying programmes
The device detects the moisture in the load and auto-
matically adjusts the optimum drying time. The electronic
control ensures the best drying results even at less loading
of the dryer.
It is activated in all programs, except in the
WARM, COOL and FRESHEN UP programs with timer
controls.
Summary of Contents for WTK 5020
Page 24: ...Stand 08 14 WTK 5020...