BOMANN TSG 707, Instruction Manual

Page: 7 / 25

The display will s how different level of salt consumption.
It is recommended to select this level according to below table:
Step 2: select a certain level of salt consumption
Setting on the
water softener
Digital display stalls
1
H1
2
3
4
5
6
1) German degree of measuremen t for the water hardness
2) mi llimol, internationel unit for water hardness
*) factory setting
dH
Water Hardness level
mmol/l
1)
2)
*
0-5 0-0.9
6-11 1.0-2.0
12-17
18-22
23-34
35-45
2.1-3.0
3.1-4.0
4.1-6.1
6.2-8.0
H2
H3
H4
H5
H6
1) When you push Start/Pause button , digital display stalls o f info rmation.
Press
stalls by H1 H2 H3 H 4 H5 H6 " cycle o f change
2)
3)
Sta rt/Pause button every time, "H6
After setting, re boot the dishwasher, the setting level w ill be remembered.
Then you can use it as usual .
5
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowin g water to sheet off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door nex t to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
ON/OFF
h. min.
ON/OFF
Digital display
Start/Pause
Button
Delay
Button Power
Button