background image

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

Adjusting Rinse Aid Dispenser

Th e rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are problems, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly o r are spotte d, ad just the dial to th e next
higher number until your dishes are spot-fre e. The recommended setting is "4".
(Factory value is "4".)

Increase the dose if there are drops of water o r lime spots on the dishes after washing.
Reduce it if there are sticky whitis h stains on your dish es o r a bluish film on glassware or
knife blades.

1

2
3

As the rinse aid d iminishes, the size o f the black dot
on the rinse aid level indicator changes, as illustra ted b elow.

Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty

6

When to Refill the Rinse Aid Dispenser

If th ere is no rinse-aid warning ligh t in the c ontrol panel, you can jud ge the amount of rinse-aid by the color
of the optical level indicator

located ne xt to the cap. When th e rinse-aid c ontainer is full, the whole

indicator will be dark .As the rinse -aid diminishes, the size of the dark dot de creases. You should never let
the rinse aid get below 1 / 4 full.

during the next wash.

Don't forget to re place the cap be fore you close dis hwa sher door.

Clean up any rinse aid split during filling with an absorbent cloth to avoid excessive foaming

Detergents with its chemical ingredients are ne cessary to remove dirt, c rush dirt an d transport it out of the dishwasher.
Most of commerc ial q uality detergents are suitable for this purpose.

" "

Attention!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances

(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

Summary of Contents for TSG 707


























Reviews: