12
•
Use a soft absorbent cloth for drying after clean-
ing.
Cleaning the side racks
Cleaning the side racks
Cleaning the side racks
Cleaning the side racks
Always remove the side racks, if you want to clean
the oven walls thoroughly. Highly soiled side racks
can be soaked in the removed state, which makes
cleaning easier.
•
Remove the rack by slightly bending the lowest
metal rod to loosen it from the mounting screw
and pulling it towards the oven center.
•
Lift the rack upwards out of the mounting holes.
•
Replace the racks after cleaning and thoroughly
drying them.
Cleaning
Cleaning
Cleaning
Cleaning the glass panel
the glass panel
the glass panel
the glass panel
If necessary, clean the inside of the glass panel.
•
Open the appliance door.
•
Remove the retaining strip by
loosening the screws laterally
of the strip.
•
Take off the glass carefully forward.
•
Replace the glass panel and affix the retaining
strip; after you’ve cleaned the glass and dried it
thoroughly.
Reverse the bulb
Reverse the bulb
Reverse the bulb
Reverse the bulb
WARNING:
WARNING:
WARNING:
WARNING:
•
Make sure that the appliance is turned off from
the power supply (fuse).
•
Allow the lamp to cool down before replacing the
bulb. There is risk of burns!
There is risk of burns!
There is risk of burns!
There is risk of burns!
NOTE
NOTE
NOTE
NOTE::::
Use the correct bulb, heat resistant up to 300°C:
1 x 25 W, 220
1 x 25 W, 220
1 x 25 W, 220
1 x 25 W, 220----240 V
240 V
240 V
240 V~~~~
•
Unscrew the lamp cover, clean it with a dry cloth.
•
Change the bulb.
•
Reattach the lamp cover and check the function-
ality.
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Before you contact an
Before you contact an
Before you contact an
Before you contact an authorized specialist
authorized specialist
authorized specialist
authorized specialist
Problem
Problem
Problem
Problem
Possible causes
Possible causes
Possible causes
Possible causes
What to do
What to do
What to do
What to do
Unit does
not work
The power sup-
ply is discon-
nected.
Check the fuse of
your domestic
wiring system.
Oven lamp
does not
work
Bulb is defective,
has been in-
serted incorrectly
or not firmly.
Check the bulb,
see “Reverse the
bulb”.
Strong for-
mation of
smoke
Grease residue
in the oven.
Switch off the
oven and allow to
cool down before
cleaning.
NOTE:
NOTE:
NOTE:
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical Data
Technical Data
Technical Data
Technical Data
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Connection voltage: …............220-240 V~ / 50/60 Hz
Connection power: …………………….…........2300 W
Fuse protection: ………………...……………..…..16 A
Protection class: ………………………..………………I
Dimension H x W x D /
Dimension H x W x D /
Dimension H x W x D /
Dimension H x W x D / Weight……...……..…………..
Weight……...……..…………..
Weight……...……..…………..
Weight……...……..…………..
Oven: ………...………………….59.0 x 59.5 x 55.0 cm
Cabinet cutout: ….....................60.0 x 56.0 x 57.0 cm
Net weight: ………………….…..........………...30.4 kg
The right to make technical and design modifications
during continuous product development remains re-
served.
Summary of Contents for EBO 7901
Page 15: ...15 ...