BOMANN EBO 7901, Instruction Manual

Page: 7 / 16

7
Startup / Operation Startup / Operation Startup / Operation Startup / Operation
Before initial use Before initial use Before initial use Before initial use
•
Clean the oven interior with all therein located ac-
cessories. Follow the instructions that we give you
in the chapter "Cleaning and Maintenance".
•
In order to burn any manufacturing residue, heat
the closed oven for approx. 30 minutes at 250°C.
Use the heating function [Upper/lower heating].
Then switch to the heating function [Grill] for an-
other 20 minutes.
NOTE
NOTE NOTE
NOTE: : : :
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore en-
sure for a good ventilation of the room during
heating.
Operation Operation Operation Operation
1111 Oven function selector switch Oven function selector switch Oven function selector switch Oven function selector switch
The function selector switch is used to set the type of
heating. Rotate the function selector switch until the
icon for the desired type of heating points upwards.
2 2 2 2 Power control lamp Power control lamp Power control lamp Power control lamp
The control lamp indicates the oven operation.
3333 Oven temperature selector switch Oven temperature selector switch Oven temperature selector switch Oven temperature selector switch
CAUTION:
CAUTION: CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be dam-
aged.
The temperature selector switch is used to adjust the
oven temperature. The thermostat allows the temper-
ature setting from 50°C to 250°C.
4444 Oven temperature control lamp
Oven temperature control lamp Oven temperature control lamp
Oven temperature control lamp
The temperature control lamp indicates the heating
operation. If the lamp goes off, the set oven tempera-
ture is reached.
During operation, the oven must continuously reheat
to keep the temperature stable. When reheating the
control lamp is lighting (thermostat function).
NOTE NOTE NOTE NOTE::::
If the recipe recommends putting the food in the pre-
heated oven only, this should not be done before the
control lamp turns off for the first time.
5 Digital timer with LED Display
5 Digital timer with LED Display 5 Digital timer with LED Display
5 Digital timer with LED Display
Control lamps Control lamps Control lamps Control lamps
1111 Auto-function 3
3 3
3 Minute minder (Alarm)
2222 Manual operation 4444 Decimal point
Function buttons Function buttons Function buttons Function buttons
Reduce the time
Manual operation / Program selection
Increase the time (Set the beep volume)
The time and the various functions of the timer are
set via the display. Use the buttons and to
make the settings:
After connecting to the power supply, the display
shows [00•00] and the symbol ((((4444)))) flashes:
- first select the beep volume
- and then set the time of day to put the appliance
into operation.
Set the beep volume Set the beep volume Set the beep volume Set the beep volume
You have the option of selecting 3 loudness levels.
•
While the symbol ((((4444)))) is flashing, you can select
the volume level using the
button.