BOMANN CB 839, Instruction Manual

Page: 44 / 70

GB
44
USEFUL TIPS ON BATTERY LIFE
Battery life can be lengthened by paying attention to the following instructions:
• Wait until the battery is almost completely fl at before charging it.
• Never leave the machine connected to the charger for more than 8 hours.
• Charge the machine only with room temperatures between 0 and +40°C.
Use
Short Operating Time
If you have used the device continuously for 5 minutes, please let it cool down fur
approximately 5 minutes.
Beard trimming and cutting
Shift the selector (2) to the ON position. Start with the longest cutting level and shorten the
whole beard or the beard on the chin or cheeks gradually to the desired length.
CAUTION:
Lock the selected cutting length (cutting length comb) in position with the locking switch
located on the back of the housing (position – „lock“).
Hair cutting/thinning
Shift the selector (2) to the ON position. Start with the longest cutting level and shorten the
hair gradually to the desired length.
CAUTION:
Lock the selected cutting length (cutting length comb) in position with the locking switch
located on the back of the housing (position – „lock“).
Contour cutting and neck shaving
• Remove the cutting length comb (3) and shift the selector (2) to the ON position.
• The shearing head enables the precise trimming of the beard contours even areas,
which are diffi cult to reach, and the clean shaving of the hairline in the neck area.
05-CB 839.indd 44 05-CB 839.indd 44 31.07.2008 9:24:32 Uhr 31.07.2008 9:24:32 Uhr