Bomag BW 156 D-3, Service Manual

Page: 4 / 190

Service Training
BW 156/177 D-3/DH-3/PDH-3 - A 1 -
BW 178/179 D-3/DH-3/PDH-3
Foreword
This training manual was specially written for the new single drum rollers BW 156 D-3 to BW 179 PDH-
3 of generation 3. This range of single drum rollers is the consistent further development of the product
range BW 142 D-2 to BW 172 PD-2 and represents a perfect adaptation to the presently highest
technical standards.
Today single drum rollers of series BW 156 and BW 179 can be found on construction sites all over the
world. These machines are mainly used in earth construction, for the preparation and sealing of sanitary
landfill sites and, as AD-versions, for the compaction of bituminous wear courses.
During the development of this new generation of single drum rollers special attention was paid to the
necessities and requirements of customers and operating personnel.
Also in the future we will obviously undertake everything possible to increase the benefits for our
customers and we therefore would like to ask you to inform us about your ideas and suggestions.
The introduction of new or enhanced products obviously emphasizes the necessity of training for all
persons who are responsible for a trouble free service support for these products.
For this reason we have revised these training documents. They should help the trainer to pass the
necessary information on to the persons attending the training course in an easy to understand way.
This documentation is by no means complete. Technical data and details, which were not yet available
at the time this manual was written or which have changed since the introduction of this manual, must
be explained by the trainer during the training session.
These training documents are not subjected to a regular updating service. However, all important
changes to the machine will be included during a revision.
The chapter „Documentation“ contains notes on further documents, which are additionally available for
this machine. The currently valid operating and maintenance instructions and the latest electric and
hydraulic diagrams are part of this training manual.