Bomag BW 100 ADM-2, Operating Instructions, Maintenance Instructions

Page: 94 / 96

Trouble shooting
BOMAG 94 BW 80 AD-2 Fam.
Engine over-
heats, shut
down immedi-
ately! Radiator excessively soiled Clean the cooling fins
Coolant level to low Top up coolant.Danger! Only when the
engine is cold
Injection valve defective Have examined by a specialist
Engine oil level too low Top up engine oil to the upper dipstick
mark
Filling capacity of the injection pump not
correctly adjusted Have adjusted by a specialist
Lack of cooling air at the cooling air blow-
er Clean the cooling air duct
V-belt loose or broken Tension or replace the V-belt
Air filter cartridge dirty Clean, change if necessary
Engine oil pres-
sure too low,
shut down im-
mediately Leakages in the lubrication system, oil
level too low Check fittings on oil lines, lubrication oil fil-
ter for leaks, tighten the fittings if neces-
sary. Top up lubrication oil up to the upper
mark on the dipstick.
Engine oil of wrong SAE-class Change the engine oil.
The charge con-
trol light lights
during operation The generator does not charge the bat-
tery, because generator or regulator is de-
fective Have examined by a specialist
Faults Possible cause Remedy