Bomag BW 100 ADM-2, Operating Instructions, Maintenance Instructions

Page: 72 / 96

Every 250 operating hours
BOMAG 72 BW 80 AD-2 Fam.
l
Place the new V-belt on the V-belt pulleys.
l
Tension the V-belt as described before.
!
Danger
Danger of injury!
Reassemble the guard for the blower.
!
Caution
Check the V-belt tension after a running time of
30 minutes.
5.20 Checking the condition and
tension of the toothed belt
for the pump drive
!
Danger
Danger of accident!
This work must only be performed with the en-
gine shut down!
Fig. 101
l
Remove the protection hood (Fig. 101).
Fig. 102
l
Check the entire circumference of the toothed
belt (Fig. 102) for starting cracks in the area of
the basis and the back of the teeth.
l
Have the toothed belt replaced if starting
cracks are found.
l
Use the belt tension tester (BOMAG P/N
079 947 10) to check whether the toothed belt
can be depressed 6 to 8 mm between the