Bomag BW 100 ADM-2, Operating Instructions, Maintenance Instructions

Page: 39 / 96

Operation
BOMAG 39 BW 80 AD-2 Fam.
!
Caution
Perform the starting process for maximum 20
seconds without interruption and pause for a
minute between starting attempts.
If the engine has not started after two attempts
perform trouble shooting.
Fig. 42
l
Turn the ignition key (Fig. 42) through position
"II" to position "III", the starter will crank the en-
gine.
l
As soon as the engine ignites return the igni-
tion key to position "I".
!
Caution
Run the engine warm for a short while, but do
not run with idle speed for more than 10 min-
utes.
4.4 Starting at low tempera-
tures
At temperatures below approx. +10 °C:
l
Check, whether the travel lever is locked to the
right in braking position.
l
Check, whether the emergency stop switch is
unlocked.
Fig. 43
l
Shift the throttle lever (Fig. 43) to position
"MAX" and lock it.
Fig. 44
l
Turn the ignition key (Fig. 44) through position
"I" to position "II" and hold it for approx. 6 sec-
onds.