n
The machine must not tip, roll off, slide down or fall during
operation.
n
Observe the gradability and the maximum cross slope of the
machine
Chapter 2 ‘Technical data’ on page 11
.
Check how the vibrations affect the working environment.
n
The load bearing capacity of the soil can be reduced by the
vibration effect.
n
The side walls of trenches, construction pits and slopes must
be stable and mustn’t crumble when exposed to vibration.
n
When compacting with vibration, you must always check the
effect of the vibration on nearby buildings and underground
supply lines (gas, water, sewage, electric power).
n
If necessary, stop compacting with vibration.
n
If unsure, consult an expert / qualified person to assess the
working environment.
Components can be very hot during or immediately after operation
(e.g. engine, exhaust, exciter system).
n
Do not touch hot components.
n
Keep waste such as paper, dry leaves or dry grass away from
hot components.
n
Keep a fire extinguisher at hand.
Gasoline is explosive!
n
Safety regulations and environmental protection regulations
must be followed when handling gasoline.
n
Do not allow gasoline to come into contact with hot compo-
nents.
n
Before filling up, turn off the engine and let the machine and
engine cool down.
n
Smoking and open fire is prohibited.
n
Keep away from heat sources, sparks and other sources of
ignition.
n
Do not spill any gasoline.
Danger to life caused by an operationally unsafe machine!
n
The machine must only be serviced and repaired by qualified
and authorized personnel.
n
Contact our customer service to carry out the required mainte-
nance work or necessary repairs.
Concerning your safety – Basic safety regulations for safe operation
BVP 10/30
24
Go to
Discount-Equipment.com
to
order your parts
