4.
Park the machine in secured condition.
Special tool:
n
16 mm spark plug spanner
1.
Clean the area around the spark plug.
2.
Remove the spark plug using the spark plug spanner.
3.
Fill in several drops of fresh engine oil through the ignition
plug opening.
4.
Crank the engine several times with the recoil starter to dis-
tribute the oil in the cylinder.
5.
Screw the spark plug back in.
6.
For this, slowly pull the starter rope, until resistance can be
felt and the notch on the flywheel is aligned with the bore on
the top side of the fan cover.
ð
Valves will be closed so that no moisture can enter into
the cylinder.
7.
Slowly guide the starter rope back.
1.
After shutting down store the machine under cover in a dry
and well ventilated room.
2.
Cover the engine to protect it against dust and moisture.
3.
A machine with conserved engine must be clearly marked by
attaching an information sign.
8.9.5.2
Measures before restarting
DANGER!
Danger to life caused by explosive gas-air
mixes!
–
Do not allow gasoline to come into contact with
hot components.
–
Smoking and open fire is prohibited.
–
Keep away from heat sources, sparks and
other sources of ignition.
–
Do not spill any gasoline.
Protecting the cylinder
Fig. 124
Fig. 125
Parking the machine
Maintenance – As required
BVP 10/30
113
Go
to
Discount-Equipment.com
to
order
your
parts
