Bomag BPH 80/65, Operating Instructions, Maintenance Instructions

Page: 42 / 58

Maintenance every 6 months
BOMAG
42
BPH 80/65
Maintenance every 6 months
4.13 Changing the engine oil
!
Danger
Danger of scalding! When draining off hot en-
gine oil.
Environment
Catch running out fuel, do not let it seep into
the ground and dispose of environmentally.
! Caution
Drain the engine oil at operating temperature.
Stand the machine on level ground.
Change the engine oil filter with every oil
change.
l
Open the front hood.
Fig. 43
l
Pull the dipstick (Fig. 43) out.
Fig. 44
l
Unscrew the oil drain plug and catch running
out oil (Fig. 44) .
l
Clean the plug and screw it back in with a new
seal ring.
! Caution
Clean the engine oil filter before filling in new
oil, refer to the next section.
Fig. 45
l
Unscrew the oil filler neck cap.
l
Fill in new engine oil (Fig. 45) .
For quality and quantity of oil refer to the table
of fuels and lubricants.
l
Insert the oil dipstick and check the oil level.
l
Unscrew the oil filler neck cap.
l
After a short test run check drain plug and oil
filter for leaks.
l
Close the rear hood.