Bomag BPH 80/65, Operating Instructions, Maintenance Instructions

Page: 13 / 58

Safety regulations
BOMAG
13
BPH 80/65
Environment
Sections marked like this highlight activities
for the safe and environmental disposal of fu-
els and lubricants as well as replaced parts.
Safety stickers on the machine
Keep safety stickers in good condition and legible
and follow their meaning.
Replace damaged and illegible safety stickers.
Loading the machine
Secure the machine against turning over or slip-
ping off.
Persons are highly endangered if they
l
step under loads being lifted or
l
stand under loads being lifted
Secure the machine on the transport vehicle
against rolling off, slipping and turning over.
Starting the machine
Before starting
Become acquainted with the equipment, the con-
trol elements, the working mode of the machine
and the area you will be working in.
Use your personal protective outfit (hard hat, safe-
ty boots etc.). Wear ear defenders.
Check before starting, whether:
l
the machine shows any obvious defects
l
all protective devices are properly secured in
their place
l
the control elements are fully functional
l
the machine is free of any oily and combustible
material
l
all handles are free of grease, oils, fuels, dirt,
snow and ice.
Use only machines which have been serviced at
regular intervals.
Do not use any starting aids such as Startpilot or
ether.
The vibration must always be shut off before start-
ing the engine.
For starting remove your feet from the danger
zone of the base plate.
Starting in closed rooms
Exhaust fumes are life threatening! Always ensure
an adequate supply of fresh air when starting in
closed rooms!
Operation
Guide the machine in such a way, that your hands
stay clear of any solid obstructions, risk of injury.
Watch out for unusual noises and development of
smoke. Detect the cause and have the fault cor-
rected.
Operate the vibratory plate only with full throttle, as
otherwise the centrifugal clutch may be damaged.
Never let the machine run unattended.
Parking the machine
If possible, park the machine on level ground.
Before leaving the machine:
l
Park the machine so, that it cannot turn over.
l
Shut the engine down and pull the ignition key
out.
Always secure parked machines, which could be
in the way, with appropriate measures.
Filling the fuel tank
Refuel only with the engine shut down.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Maintenance
Maintenance work must only be carried out by
qualified and authorized personnel.
Keep unauthorized persons away from the ma-
chine.
Do not perform service work while the engine is
running.
If possible, park the machine on level and firm
ground.
Working on hydraulic lines
Vor jeder Arbeit an Hydraulikleitungen diese
drucklos machen. Unter Druck austretendes Hy-
drauliköl kann die Haut durchdringen und schwere