16
English
3 - Use
The device can be used in all positions, carried by hand or suspended.
Procedure for use
• Install
the
battery
• Switch
the
device
on,
by
pulsing
on
the
main
trigger
• Position
the
Rivet Nut
®
on
the
mandrel.
A
light
pressure
starts
the
motor
and
causes
the
automatic
screwing
of
the
Rivet Nut
®
,
then
the
shutdown
(Push-Pull
system).
Then
insert
the
Rivet Nut
®
into
the
hole.
• Alternatively,
insert
the
Rivet Nut
®
into
the
hole,
then
push
the
mandrel
against
it
in
order
to
activate
the
push-pull.
• Press
the
trigger
and
hold
it
until
the
mandrel
has
gone
outside
from
the
Rivet Nut
®
thread.K
KEEP THE TRIGGER PRESSED FOR THE ENTIRE DURATION OF THE CYCLE.
IF THE TRIGGER IS RELEASED, THE INSERTION IS NOT CORRECT
Push pull
(automatic)
Insert
Crimp
Spin off
(automatic)
Unscrew button
• If
unscrewing
is
difficult,
use
the
CENTER
(UNSCREW
/
RESET)
button.
To
unscrew,
hold
the
button
down
until
the
mandrel
has
fully
gone
outside
from
the
Rivet
Nut
®
thread.K
Call Cardinal Components to Order or for a Quote
800-236-3200 - [email protected] - www.rivetnutusa.com