21
English
4 - Maintenance
Occasional maintenance
• Disconnect the battery
• Remove the upper oil fill screw (Pos. 7) and the seal (Pos. 8).
• Check the oil level in the orifice (Pos. 7) and top up the oil until the lower level of the orifice
tapping is reached. (Use the specific accessories ref.
236 166
00309)
• Reinstall the seal (Pos. 8) and the screw (Pos. 7).
• Reconnect the battery.
• If the stroke is not reached, repeat this operation.
Disconnect
the
battery
before
carrying
out
any
maintenance
operation
or
disassembly.
With
a
frequency
of
500
,
000,
the
device
needs
be
disassembled
completely
and
the
damaged
and
worn
parts
need
be
replaced.
It
is
also
recommended
to
replace
all
the
components
contained
in
the
repair
case.
The
tool
will
advise
the
user
when
this
term
is
reached
(Capter
Service
/
Next
service).
Note
than
training
are
proposed
by
BÖLLHOFF
teams
for
giving
you
the
required
knowledges
for
maintaining
your
tool
and
ensuring
good
performances
and
optimized
lifetime.
For
proceeding
to
this
deep
maintenance
operation,
please,
refer
to
the
dedicated
maintenance
documentation.
The
tooling
needed
for
realizing
the
operations
and
the
way
to
do
it
are
described
into
this
documentation.
Oil
level
check
DEVICE MAINTENANCE MUST BE CARRIED OUT BY QUALIFIED PERSONNEL.
OPERATORS SHOULD NOT PERFORM DEVICE MAINTENANCE OR REPAIRS,
UNLESS THEY HAVE BEEN ADEQUATELY TRAINED.
Call Cardinal Components to Order or for a Quote
800-236-3200 - [email protected] - www.rivetnutusa.com
