26
English
7 - Warning list
1
2
3
Read Operator Manual
High current of the M1 motor
Reduce the force
Read Operator Manual
High current of the M2 motor
Contact the Assistance Service
Wrong battery
The battery is not correct
Replace the battery and use only
the batteries provided
4
Not ready, press RESET
M1 motor in the wrong position
Press RESET
5
Low Battery Voltage
Discharged battery
Replace the battery
6
Read Operator Manual
Excessive pull time
Check the oil level or replace the
battery
7
Read Operator Manual
Excessive M2 screwing/unscrewing
time
Contact the Assistance Service
8
Bad M1 Position, press RESET
High pull end position
Check the oil level and press Reset
9
Pressure, please Check Oil
Low oil pressure
Check the oil level
10
Force not correct
-
-
11
M1 Motor, High Temperature
Excessive M1 motor temperature
Wait a few minutes before
resuming work
12
M2 Motor, High Temperature
Excessive M2 motor temperature
Wait a few minutes before
resuming work
13
Drive, High Temperature
Excessive temperature of the
electronics
Wait a few minutes before
resuming work
14
No
Rivet Nut
®
on
the
mandrel
When enabled in menu “Start
condition” this alarm warns that
a rivet is not loaded
Load
a
Rivet Nut
®
on
the
mandrel
15
Error communication
Internal hardware communication
error between LCD CPU and M1
Drive board or M2 Drive board
Contact the Assistance Service
Error communication
Internal hardware communication
error between LCD CPU and M1
Drive board or M2 Drive board
Contact the Assistance Service
16
17
Wrong battery
The battery connected is not correct
Replace the battery by a correct one
18
Nose not installed
When enabled means that the nose
is uninstalled
Check that the nose is correctly
installed against the body
19
M1 home reset
Error doing M1 home reset
Push on “Reset button” for driving
the system in rest position
21
22
Maintenance service needed
The number of cycles for inspection
is reached
Contact the Assistance Service or
realise the maintenance operations
At powerup at least one LCD
pushbutton is pressed
Check that the different button are
free / body
No.
Text on the display
Meaning
Solution
In case of abnormal conditions during operation, the “warning” page will indicate the alarm
and possibly the operation to eliminate it.
Call Cardinal Components to Order or for a Quote
800-236-3200 - [email protected] - www.rivetnutusa.com
