13
•
RTSP Port: Default 554
o
RTSP is the protocol used to pull real-time video over the network (using VLC Player or other
network video- compatible software)
o
Changing this port number will change the way the RTSP video can be viewed. Most RTSP
streaming software uses port 554 by default, therefore it is not recommended that this port
number be changed.
o
URL for receive RTSP streaming is:
Main stream
– rtsp://IP:554/stream/main
Sub stream
– rtsp://Ip:554/stream/sub
Firmware Upgrade
This page allows the user to get the camera current version information, camera name, serial number and to
do upgrade.
•
Control version
o
To display the camera current control version
•
Device Name
o
The name of this camera model, you also
can see it on the top left corner of any page.
•
Serial Number
o
The unique serial number after the camera is
produced, each camera serial number is
different, and can’t be changed.
•
Bootloader Version
o
To display the camera current bootloader
version
•
System Version
o
To display the camera current system
version
•
App version
o
To display the camera current App version
•
Upgrade
o
You can upgrade the camera version when
there has new firmware available.
o
New firmware file can be obtained from BOLIN Technology
o
Click “Click to upload files” button, navigate to the file (.bin), select and then can start upgrade
o
It takes a few minutes for the camera to come back online
Reset Options
This page allows user to reset parameter to default, you
can just reset image parameter or reset all parameters,
Also supports to reboot the camera
•
Reset
o
Will reset the camera’s image parameter
to factory default values
•
Reset/Reboot
o
Will reset all settings / parameters to
factory default values and camera will
auto reboot
•
Reboot
o
This button performs a soft reboot
(camera will restart without needing to
disconnect power)
