11
One Push:
The One Push White Balance mode is a fixed white balance mode that may be
automatically readjusted only at the request of the user (One Push Trigger), assuming that a white
subject, in correct lighting conditions, and occupying more than 1/2 of the image, is submitted to the
camera. One Push White Balance data is lost when the power is turned off. If the power is turned off,
reset One Push White Balance.
NOTE: When you select the One Push
Perform the following operations:
1. Place an image of white subject (For example: A piece of white paper) in the center of the
screen.
2. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
Auto tracking:
Auto Tracking White balance (2000K to 10000K), allows the camera to adjust the tone
according to the temperature of the light source illuminating the subject
Manual:
This is a mode that enables you to manually set the control of Red and Blue gain from o to 255
Image
The Image menu is used to set the items related to image
Mirror:
You can have the image as seen in a mirror, with the right side as though it were the left.
Flip:
Image E-Flipper
– Used when ceiling mounting or upright mounting. Set to OFF is upright mode, set to
ON is for ceiling mount.
BLC (Backlight compensation):
When the background of the subject is too bright, or when the subject is too dark, back light compensation will
make the subject appear clearer.
Gamma:
The gamma can be set to value from 0 to 4
D-WDR (Wide Dynamic Range):
Wide Dynamic: ON, OFF. The camera distinguishes light and dark areas
within the same scene, adjusts the brightness for dark areas, and also controls the blown-out highlights.
You can select the wide dynamic range mode between ON and OF
Image Setting
The Image Setting menu is used to set the items related to image quality
Brightness:
You can adjust the values manually for electronic brightness level from 0 to 15
Sharpness:
Picture sharpness value ranges from 0 to 15. You can enjoy emphasized edge and high-
resolution images.
Contrast:
You can adjust the contrast level in the range from 0 to 15. The smaller the value is, the lower the
