12
contrast becomes, and the larger the value is, the higher the contrast becomes.
Saturation:
You can configure the color gain from 0-15. Use this setting when bright color is particularly
important.
Noise-reduction
The Noise-reduction is used to set the items related to noise, it supports 2D and 3D mode noise reduction.
You can enjoy clearer images by removing unnecessary noise.
For 3D mode, you can select Auto, or set value from 1 (MIN) to 4 (MAX).
Audio Setting
This section contains the ability to select the audio Encode Mode,
Sample rate and Bitrate.
•
Encode Mode:
o
AAC
o
LPCM
•
Sample rate:
o
Selectable from 11050, 22050, 44100
•
Bitrate (Kbps):
o
Selectable from 32000, 48000, 64000, 96000, 128000
Ethernet
The Ethernet settings page is where the user is able to configure the
following:
•
DHCP options
o
DHCP
– An IP address will be dynamically assigned to
the camera from the gateway (router)
o
Static IP
– The user will enter / define the IP address
•
IP Address
•
Netmask
•
Gateway
•
DNS (Domain Name System)
•
MAC (MAC address of the camera)
o
Media Access Control address, is a unique identifier
assigned to a network interface controller of the camera,
it comes with camera by default, can’t be changed.
•
HTTP port: Default 80
o
HTTP is the protocol used to access the web interface.
o
Changing this port number will require the user to specify
the port number when entering the IP address to the web
browser.
o
For example, if it is changed to 8080, the IP address will
need to be entered as follows in order to access the web interface: http://192.168.0.13:8080
