4
Logging in to the Web Interface
The default static IP address of the camera is 192.168.0.13, and the default subnet mask is
255.255.255.0
The following uses Internet Explorer 11 as an example to describe the login procedure.
1. Browse to the login page by entering the
correct IP (default IP is 192.168.0.13)
address of your camera in the address bar.
2. Enter the username and password, and then
click
Login
. For the first login, use the
default username
admin
and password
admin
.
•
The default password is used for your
first login. To ensure account security,
please change the password after your
first login. You are recommended to set a
strong password (no less than eight
characters).
•
The camera protects itself from illegal
access by limiting the number of failed
login attempts. If login fails six times
consecutively, the camera locks
automatically for ten minutes.
NOTE: If your PC/laptop already installed VLC player, you can watch live preview directly after logged in. If
your PC/laptop haven’t installed VLC player yet, you may be prompted to install the VLC player.
Please download and install the correct version of VLC player (it means if your PC/ laptop operating system is
64 bit, you have to download the 64 bit version VLC, if your PC/laptop is 32 bit, so you have to download the 32
bit version VLC), after done the installation, user can re-login to the IP interface and watch the live preview.
